MajwareMAJWARE
General

(0008,0033)

Content Time

Keyword: ContentTime

The time the creation of the image pixel data started; for other objects, the time their content was created.

Tag Attributes

Tag ID
(0008,0033)
Compact
00080033
Keyword
ContentTime
VR
TM — Time
VM
1
Required
Type 2C — required when a condition applies, may be empty
PS3.15
Basic Profile action Z/D
Retired
No

Defined in

General Image Module

What Content Time contains

For images it is often close to Acquisition Time, but it can differ, for example for reconstructions made later. For structured reports, key object selections and presentation states it is the time the content was created.

Group 0008 holds general identifying information: what kind of object this is, when it was made, and by which equipment and people.

Value format: TM (Time), VM 1

(0008,0033) ContentTime has Value Representation TM (Time) and Value Multiplicity 1, which means exactly one value.

TM — Time

A time of day on a 24-hour clock in the format HHMMSS.FFFFFF. Components on the right may be left out, so 14, 1425 and 142530.5 are all valid.

Length
14 bytes maximum
Characters
The digits 0–9 and the period.

Example value

143015

Format mistakes to avoid

  • Colons (14:25:30) come from the old ACR-NEMA format and are not valid in DICOM.
  • A time carries no time zone. If one is needed, Timezone Offset From UTC (0008,0201) holds it.

Where ContentTime appears

Defined inTypeMeaning
General Image ModulePS3.3 C.7.6.12CRequired, possibly empty, when its condition applies.Required if the image is part of a series in which the images are temporally related; may be present otherwise.

A module lists the attributes an object must or may carry. Many IODs (CT Image, MR Image, Secondary Capture and others) include the same module, and an IOD-specific module can make an attribute stricter than the general one.

De-identification (PS3.15)

PS3.15 Table E.1-1 gives Content Time the Basic Profile action Z/D: replace it with an empty value; if the IOD requires it to have a value, use a dummy value instead.

With the Retain Longitudinal Temporal Information with Full Dates Option, the action is K: keep it unchanged (a sequence is kept but cleaned item by item).

With the Retain Longitudinal Temporal Information with Modified Dates Option, the action is C: clean it: replace values with similar values that carry no identifying information.

To see how de-identification changes your own files, try the free DICOM Anonymizer, which runs in the browser and uploads nothing.

In archives and migrations

When studies move between archives, the objects should arrive with this attribute exactly as it was sent. Compare a sample of objects on both sides after the transfer rather than assuming nothing changed.

Common errors and how to fix them

Troubleshooting: Structured Reports with incorrect Content Time appear out-of-sequence in the patient timeline. Verify the reporting system populates this from the actual report generation time.

Check a file in seconds with the free DICOM Validator: it reads the header in your browser, lists the tags with their values, and flags missing or malformed key attributes.

Content Time: frequently asked questions

What is DICOM tag (0008,0033) Content Time?

The time the creation of the image pixel data started; for other objects, the time their content was created.

What VR and VM does Content Time (0008,0033) have?

(0008,0033) ContentTime has Value Representation TM (Time) and Value Multiplicity 1, which means exactly one value. A time of day on a 24-hour clock in the format HHMMSS.FFFFFF. Components on the right may be left out, so 14, 1425 and 142530.5 are all valid. Maximum length: 14 bytes maximum.

Is Content Time (0008,0033) required?

In the General Image Module (PS3.3 C.7.6.1) it is Type 2C: required, possibly empty, when its condition applies. Required if the image is part of a series in which the images are temporally related; may be present otherwise.

How is Content Time handled when de-identifying DICOM files?

PS3.15 Table E.1-1 gives Content Time the Basic Profile action Z/D: replace it with an empty value; if the IOD requires it to have a value, use a dummy value instead. With the Retain Longitudinal Temporal Information with Full Dates Option, the action is K: keep it unchanged (a sequence is kept but cleaned item by item). With the Retain Longitudinal Temporal Information with Modified Dates Option, the action is C: clean it: replace values with similar values that carry no identifying information.

How do I troubleshoot Content Time (0008,0033)?

Structured Reports with incorrect Content Time appear out-of-sequence in the patient timeline. Verify the reporting system populates this from the actual report generation time.

Check ContentTime in your files

The free DICOM Validator lists every header tag and flags problems. Files stay in your browser.

Open DICOM Validator →

Remove patient data before sharing

The free DICOM Anonymizer applies a de-identification profile in your browser, with no upload.

Open DICOM Anonymizer →

Sources

Checked against the DICOM standard, release 2026d. Module Types, query keys and de-identification actions come from these tables:

More General tags