MajwareMAJWARE
General

(0008,0016)

SOP Class UID

Keyword: SOPClassUID

Identifies the SOP Class of the object: which Information Object Definition it follows (CT Image, MR Image, Structured Report …) together with the service class it is used with.

Tag Attributes

Tag ID
(0008,0016)
Compact
00080016
Keyword
SOPClassUID
VR
UI — Unique Identifier (UID)
VM
1
Required
Type 1 — required, with a value
PS3.15
Not listed in PS3.15 Table E.1-1
Retired
No

Defined in

SOP Common Module

What SOP Class UID contains

SOP Class UID says what kind of object this is: CT Image Storage, MR Image Storage, Basic Text SR, Encapsulated PDF and so on. The UIDs are fixed by the standard and all start with the DICOM root 1.2.840.10008.

Before sending, two systems agree during association negotiation on which SOP Classes (abstract syntaxes) and transfer syntaxes they will use. An object whose SOP Class the receiver did not accept cannot be sent on that association, a common reason why a new modality or a new object type fails to store.

It decides which IOD the object follows, and therefore which modules and attributes it must contain. A storage SCP can only receive an object whose SOP Class it accepted as an abstract syntax during association negotiation.

Group 0008 holds general identifying information: what kind of object this is, when it was made, and by which equipment and people.

Value format: UI (Unique Identifier (UID)), VM 1

(0008,0016) SOPClassUID has Value Representation UI (Unique Identifier (UID)) and Value Multiplicity 1, which means exactly one value.

UI — Unique Identifier (UID)

A globally unique identifier made of numeric components separated by periods, for example 1.2.840.10008.1.2.1. An odd-length value is padded with one trailing NULL byte.

Length
64 bytes maximum
Characters
The digits 0–9 and the period.

Example value

1.2.840.10008.5.1.4.1.1.4

Format mistakes to avoid

  • A component may not start with a zero unless it is the single digit 0, so 1.2.03 is invalid.
  • Letters, spaces and values longer than 64 bytes are invalid.

Common values

ValueMeaning
1.2.840.10008.5.1.4.1.1.2CT Image Storage
1.2.840.10008.5.1.4.1.1.4MR Image Storage
1.2.840.10008.5.1.4.1.1.1Computed Radiography Image Storage
1.2.840.10008.5.1.4.1.1.6.1Ultrasound Image Storage
1.2.840.10008.5.1.4.1.1.7Secondary Capture Image Storage
1.2.840.10008.5.1.4.1.1.481.3RT Structure Set Storage
1.2.840.10008.5.1.4.1.1.88.22Enhanced SR Storage
1.2.840.10008.5.1.4.1.1.104.1Encapsulated PDF Storage

Where SOPClassUID appears

Defined inTypeMeaning
SOP Common ModulePS3.3 C.12.11Required, and it must have a value.

A module lists the attributes an object must or may carry. Many IODs (CT Image, MR Image, Secondary Capture and others) include the same module, and an IOD-specific module can make an attribute stricter than the general one.

In a C-FIND query using the Study Root Query/Retrieve Information Model, it is a IMAGE-level key of type O: an Optional Key: an SCP may or may not support matching on it, so check its conformance statement.

De-identification (PS3.15)

SOP Class UID is not listed in PS3.15 Table E.1-1, so the Basic Application Level Confidentiality Profile gives no specific action for it.

To see how de-identification changes your own files, try the free DICOM Anonymizer, which runs in the browser and uploads nothing.

In archives and migrations

When studies move between archives, the objects should arrive with this attribute exactly as it was sent. Compare a sample of objects on both sides after the transfer rather than assuming nothing changed.

Common errors and how to fix them

  • A new type of object is not stored

    The receiver does not accept its SOP Class. Compare the SOP Class UID with the receiver's conformance statement and add it to the receiver's configuration if it is supported.

  • SOP Class UID differs from Media Storage SOP Class UID (0002,0002)

    A tool edited the data set but not the File Meta header, or the reverse. Make both hold the same UID.

Troubleshooting: If a C-STORE fails before any data is sent, the receiver probably did not accept a presentation context for this SOP Class: check the association log and the receiver's conformance statement. A failure status of 0122H means the SOP Class is not supported; A9xx means the data set does not match the SOP Class.

Check a file in seconds with the free DICOM Validator: it reads the header in your browser, lists the tags with their values, and flags missing or malformed key attributes.

SOP Class UID: frequently asked questions

What is DICOM tag (0008,0016) SOP Class UID?

Identifies the SOP Class of the object: which Information Object Definition it follows (CT Image, MR Image, Structured Report …) together with the service class it is used with. SOP Class UID says what kind of object this is: CT Image Storage, MR Image Storage, Basic Text SR, Encapsulated PDF and so on. The UIDs are fixed by the standard and all start with the DICOM root 1.2.840.10008.

What VR and VM does SOP Class UID (0008,0016) have?

(0008,0016) SOPClassUID has Value Representation UI (Unique Identifier (UID)) and Value Multiplicity 1, which means exactly one value. A globally unique identifier made of numeric components separated by periods, for example 1.2.840.10008.1.2.1. An odd-length value is padded with one trailing NULL byte. Maximum length: 64 bytes maximum.

Is SOP Class UID (0008,0016) required?

In the SOP Common Module (PS3.3 C.12.1) it is Type 1: required, and it must have a value.

Can you query a PACS by SOP Class UID?

In a C-FIND query using the Study Root Query/Retrieve Information Model, it is a IMAGE-level key of type O: an Optional Key: an SCP may or may not support matching on it, so check its conformance statement.

How is SOP Class UID handled when de-identifying DICOM files?

SOP Class UID is not listed in PS3.15 Table E.1-1, so the Basic Application Level Confidentiality Profile gives no specific action for it.

How do I troubleshoot SOP Class UID (0008,0016)?

If a C-STORE fails before any data is sent, the receiver probably did not accept a presentation context for this SOP Class: check the association log and the receiver's conformance statement. A failure status of 0122H means the SOP Class is not supported; A9xx means the data set does not match the SOP Class.

Where are DICOM SOP Class UIDs listed?

In the UID registry of PS3.6 (Annex A). PS3.4 Annex B lists the storage SOP Classes together with the IOD each one uses.

Check SOPClassUID in your files

The free DICOM Validator lists every header tag and flags problems. Files stay in your browser.

Open DICOM Validator →

Remove patient data before sharing

The free DICOM Anonymizer applies a de-identification profile in your browser, with no upload.

Open DICOM Anonymizer →

Sources

Checked against the DICOM standard, release 2026d. Module Types, query keys and de-identification actions come from these tables:

More General tags