MajwareMAJWARE
ERR-3 = 203RejectTable 0357

HL7 203 — Unsupported version id

Code 203 means the HL7 version in MSH-12 (e.g. 2.3, 2.5.1) is not supported by the receiver. Sender and receiver are on incompatible HL7 v2.x versions.

When you see 203 (Error Condition Code)

Raised when MSH-12 declares a version the receiver does not handle. Even though HL7 v2.x is largely backward compatible, strict receivers reject unexpected version IDs.

Common causes

  • Sender declares an older or newer version than the receiver supports (e.g. 2.3 vs 2.5.1).
  • MSH-12 was hardcoded incorrectly during interface setup.
  • A version upgrade on one side that was not coordinated with the other.

How to fix it

  1. 1Set MSH-12 to a version the receiver accepts (confirm in the interface specification).
  2. 2If only the version ID differs but the structure is compatible, the simplest fix is often to map MSH-12 to the receiver's expected value in the interface engine.
  3. 3Coordinate version changes between both systems before deploying.

Example ACK message

A representative acknowledgment carrying ERR-3 = 203. Open it in the HL7 Viewer to inspect every field.

HL7 v2.x Message
1MSH||^~\&|RECEIVER|HOSP|SENDER|HOSP|20260310143510||ACK^A01^ACK|ACK00023|P|2.3
2MSA||AR|MSG00001|Unsupported version id
3ERR||||203^Unsupported version id^HL70357|E|||MSH.12 '2.3' not supported; receiver expects 2.5.1

Related codes

Frequently asked questions

How do I fix HL7 error code 203?

Code 203 (Unsupported version id) means MSH-12 declares an HL7 version the receiver does not accept. Set MSH-12 to the receiver's expected version (or map it in your interface engine if the message structure is compatible) and resend.

Debug your ACK in the viewer

Paste the ACK (or original message) and get instant segment parsing, MSA/ERR decoding, and validation. Free, client-side, no signup.

Open HL7 Message Viewer →

All HL7 error & ACK codes

Browse every acknowledgment code (Table 0008) and error condition code (Table 0357) with causes, fixes, and examples.

HL7 Error Code Reference →