HL7 202 — Unsupported processing id
Code 202 means the processing ID in MSH-11 (P = production, T = training/test, D = debug) is not accepted by the receiver — commonly a test message hitting a production-only endpoint or vice versa.
When you see 202 (Error Condition Code)
Raised when the receiver enforces a specific processing ID and the message carries a different one, preventing test data from contaminating production (or production data hitting a test feed).
Common causes
- Sending P (production) messages to a system configured to accept only T (test), or the reverse.
- A test environment left MSH-11 set to P after a config copy.
- Mismatched environment promotion between sender and receiver.
How to fix it
- 1Set MSH-11 to the processing ID the target environment expects (P for production, T for test).
- 2Verify you are pointing at the correct environment endpoint — a production message rejected with 202 on a test feed usually means wrong routing.
- 3Audit interface configs after environment cloning so MSH-11 is not accidentally left as production.
Example ACK message
A representative acknowledgment carrying ERR-3 = 202. Open it in the HL7 Viewer to inspect every field.
1MSH||^~\&|RECEIVER|HOSP|SENDER|HOSP|20260310143500||ACK^A01^ACK|ACK00022|P|2.5.1 2MSA||AR|MSG00001|Unsupported processing id 3ERR||||202^Unsupported processing id^HL70357|E|||MSH.11 'T' not accepted on production interface
Related codes
Frequently asked questions
What does HL7 error code 202 mean?
Code 202 (Unsupported processing id) means MSH-11 (P/T/D) does not match what the receiver accepts — often a test message reaching a production-only endpoint. Set MSH-11 to the expected value and confirm you are routing to the right environment.
Debug your ACK in the viewer
Paste the ACK (or original message) and get instant segment parsing, MSA/ERR decoding, and validation. Free, client-side, no signup.
Open HL7 Message Viewer →All HL7 error & ACK codes
Browse every acknowledgment code (Table 0008) and error condition code (Table 0357) with causes, fixes, and examples.
HL7 Error Code Reference →