(0028,1053)
Rescale Slope
Keyword: RescaleSlope
The value m in the linear transformation from stored values (SV) to output units: output = m × SV + b, where b is Rescale Intercept.
Tag Attributes
- Tag ID
- (0028,1053)
- Compact
- 00281053
- Keyword
- RescaleSlope
- VR
- DS — Decimal String
- VM
- 1
- Required
- Type 1 — required, with a value
- PS3.15
- Not listed in PS3.15 Table E.1-1
- Retired
- No
Defined in
What Rescale Slope contains
Rescale Slope and Rescale Intercept convert the values stored in Pixel Data into meaningful units: output = slope × stored value + intercept. Rescale Type (0028,1054) names the unit, such as HU for CT.
For CT a slope of 1 is common, so only the intercept shifts the values. In PET and some other quantitative images the slope can differ from image to image, because each image is scaled to use the full range of its stored integers; a reader that applies one slope to the whole series gets a different scale on every slice.
The slope is a Decimal String: up to 16 characters, with a period as the decimal separator. Both Rescale Slope and Rescale Intercept are Type 1 in the CT Image Module.
For standard CT, Rescale Slope = 1 and Intercept = -1024. A slope ≠ 1 is used for dose maps, PET SUV images, and some radiography workflows.
Group 0028 describes the pixel matrix and how stored pixel values are turned into displayed values.
Value format: DS (Decimal String), VM 1
(0028,1053) RescaleSlope has Value Representation DS (Decimal String) and Value Multiplicity 1, which means exactly one value.
DS — Decimal String
A fixed-point or floating-point number written as text, for example 0.5, -1024 or 1.2E-3. Leading and trailing spaces are allowed.
- Length
- 16 bytes maximum
- Characters
- The digits 0–9, +, -, E, e, the period and the space.
Example value
1
Format mistakes to avoid
- Writing a number at full floating-point precision can exceed 16 characters, which is invalid.
- A comma as decimal separator (0,5) is invalid; DICOM always uses the period.
Common values
| Value | Meaning |
|---|---|
| 1 | Stored values change only by the intercept (typical for CT) |
| (varies per image) | Quantitative images such as PET, where each image gets its own slope to fit its value range |
Where RescaleSlope appears
| Defined in | Type | Meaning |
|---|---|---|
| Modality LUT ModulePS3.3 C.11.1 | 1C | Required, with a value, when its condition applies, and absent otherwise.Required if Rescale Intercept (0028,1052) is present. |
| CT Image ModulePS3.3 C.8.2.1 | 1 | Required, and it must have a value. |
A module lists the attributes an object must or may carry. Many IODs (CT Image, MR Image, Secondary Capture and others) include the same module, and an IOD-specific module can make an attribute stricter than the general one.
De-identification (PS3.15)
Rescale Slope is not listed in PS3.15 Table E.1-1, so the Basic Application Level Confidentiality Profile gives no specific action for it.
To see how de-identification changes your own files, try the free DICOM Anonymizer, which runs in the browser and uploads nothing.
In archives and migrations
Display attributes are copied unchanged in a migration. Viewers may still render the same images differently, because each viewer decides how it applies stored windows and lookup tables.
Common errors and how to fix them
Values in a PET series jump between slices
The reader applied one slope to the whole series. Apply each image's own Rescale Slope and Rescale Intercept.
CT numbers are wrong
Slope or intercept were ignored or applied twice, for example by software that writes already rescaled values but keeps the original slope and intercept. Check a known value, such as air at about −1000 HU, against the stored data.
A slope written as 0,5
A comma is not valid in a Decimal String. Write 0.5.
Troubleshooting: PET images showing values far out of expected SUV range may have wrong Rescale Slope. Verify against the scanner's quantification documentation.
Check a file in seconds with the free DICOM Validator: it reads the header in your browser, lists the tags with their values, and flags missing or malformed key attributes.
Rescale Slope: frequently asked questions
What is DICOM tag (0028,1053) Rescale Slope?
The value m in the linear transformation from stored values (SV) to output units: output = m × SV + b, where b is Rescale Intercept. Rescale Slope and Rescale Intercept convert the values stored in Pixel Data into meaningful units: output = slope × stored value + intercept. Rescale Type (0028,1054) names the unit, such as HU for CT.
What VR and VM does Rescale Slope (0028,1053) have?
(0028,1053) RescaleSlope has Value Representation DS (Decimal String) and Value Multiplicity 1, which means exactly one value. A fixed-point or floating-point number written as text, for example 0.5, -1024 or 1.2E-3. Leading and trailing spaces are allowed. Maximum length: 16 bytes maximum.
Is Rescale Slope (0028,1053) required?
In the Modality LUT Module (PS3.3 C.11.1) it is Type 1C: required, with a value, when its condition applies, and absent otherwise. Required if Rescale Intercept (0028,1052) is present. In the CT Image Module (PS3.3 C.8.2.1) it is Type 1: required, and it must have a value.
How is Rescale Slope handled when de-identifying DICOM files?
Rescale Slope is not listed in PS3.15 Table E.1-1, so the Basic Application Level Confidentiality Profile gives no specific action for it.
How do I troubleshoot Rescale Slope (0028,1053)?
PET images showing values far out of expected SUV range may have wrong Rescale Slope. Verify against the scanner's quantification documentation.
How do I convert DICOM pixel values to Hounsfield units?
Multiply the stored pixel value by Rescale Slope (0028,1053) and add Rescale Intercept (0028,1052): HU = slope × stored value + intercept. Apply Pixel Representation (0028,0103) first, so the stored value is read as signed or unsigned correctly.
Check RescaleSlope in your files
The free DICOM Validator lists every header tag and flags problems. Files stay in your browser.
Open DICOM Validator →Remove patient data before sharing
The free DICOM Anonymizer applies a de-identification profile in your browser, with no upload.
Open DICOM Anonymizer →Sources
Checked against the DICOM standard, release 2026d. Module Types, query keys and de-identification actions come from these tables: