(0028,1052)
Rescale Intercept
Keyword: RescaleIntercept
The value b in the linear transformation from stored values (SV) to output units: output = m × SV + b, where m is Rescale Slope.
Tag Attributes
- Tag ID
- (0028,1052)
- Compact
- 00281052
- Keyword
- RescaleIntercept
- VR
- DS — Decimal String
- VM
- 1
- Required
- Type 1 — required, with a value
- PS3.15
- Not listed in PS3.15 Table E.1-1
- Retired
- No
Defined in
What Rescale Intercept contains
Rescale Intercept is the b in output = m × stored value + b. In CT it turns stored integers into Hounsfield units; with unsigned storage an intercept of −1024 lets a stored 0 represent −1024 HU, below air at about −1000 HU.
It is Type 1C in the Modality LUT Module, required whenever no Modality LUT Sequence (0028,3000) is used and never sent together with one, and Type 1 in the CT Image Module.
For CT the output unit is the Hounsfield unit. A common setup stores unsigned values with an intercept of −1024, but other intercepts, and signed storage with an intercept of 0, are equally valid.
Group 0028 describes the pixel matrix and how stored pixel values are turned into displayed values.
Value format: DS (Decimal String), VM 1
(0028,1052) RescaleIntercept has Value Representation DS (Decimal String) and Value Multiplicity 1, which means exactly one value.
DS — Decimal String
A fixed-point or floating-point number written as text, for example 0.5, -1024 or 1.2E-3. Leading and trailing spaces are allowed.
- Length
- 16 bytes maximum
- Characters
- The digits 0–9, +, -, E, e, the period and the space.
Example value
-1024
Format mistakes to avoid
- Writing a number at full floating-point precision can exceed 16 characters, which is invalid.
- A comma as decimal separator (0,5) is invalid; DICOM always uses the period.
Common values
| Value | Meaning |
|---|---|
| -1024 | Common for CT stored as unsigned values |
| 0 | No offset |
Where RescaleIntercept appears
| Defined in | Type | Meaning |
|---|---|---|
| Modality LUT ModulePS3.3 C.11.1 | 1C | Required, with a value, when its condition applies, and absent otherwise.Required if Modality LUT Sequence (0028,3000) is not present; must not be present otherwise. |
| CT Image ModulePS3.3 C.8.2.1 | 1 | Required, and it must have a value. |
A module lists the attributes an object must or may carry. Many IODs (CT Image, MR Image, Secondary Capture and others) include the same module, and an IOD-specific module can make an attribute stricter than the general one.
De-identification (PS3.15)
Rescale Intercept is not listed in PS3.15 Table E.1-1, so the Basic Application Level Confidentiality Profile gives no specific action for it.
To see how de-identification changes your own files, try the free DICOM Anonymizer, which runs in the browser and uploads nothing.
In archives and migrations
Display attributes are copied unchanged in a migration. Viewers may still render the same images differently, because each viewer decides how it applies stored windows and lookup tables.
Common errors and how to fix them
Software assumes an intercept of −1024
Many CT images use −1024, but not all. Read the intercept from every image; signed CT data commonly uses 0.
Rescale values present together with a Modality LUT Sequence
The standard forbids Rescale Intercept when a Modality LUT Sequence is present. Remove one of them at the source.
Troubleshooting: If CT numbers are off by a constant (water far from 0 HU), check that the reader applies the intercept and Pixel Representation correctly before suspecting the scanner. Do not assume −1024; read the value from each image.
Check a file in seconds with the free DICOM Validator: it reads the header in your browser, lists the tags with their values, and flags missing or malformed key attributes.
Rescale Intercept: frequently asked questions
What is DICOM tag (0028,1052) Rescale Intercept?
The value b in the linear transformation from stored values (SV) to output units: output = m × SV + b, where m is Rescale Slope. Rescale Intercept is the b in output = m × stored value + b. In CT it turns stored integers into Hounsfield units; with unsigned storage an intercept of −1024 lets a stored 0 represent −1024 HU, below air at about −1000 HU.
What VR and VM does Rescale Intercept (0028,1052) have?
(0028,1052) RescaleIntercept has Value Representation DS (Decimal String) and Value Multiplicity 1, which means exactly one value. A fixed-point or floating-point number written as text, for example 0.5, -1024 or 1.2E-3. Leading and trailing spaces are allowed. Maximum length: 16 bytes maximum.
Is Rescale Intercept (0028,1052) required?
In the Modality LUT Module (PS3.3 C.11.1) it is Type 1C: required, with a value, when its condition applies, and absent otherwise. Required if Modality LUT Sequence (0028,3000) is not present; must not be present otherwise. In the CT Image Module (PS3.3 C.8.2.1) it is Type 1: required, and it must have a value.
How is Rescale Intercept handled when de-identifying DICOM files?
Rescale Intercept is not listed in PS3.15 Table E.1-1, so the Basic Application Level Confidentiality Profile gives no specific action for it.
How do I troubleshoot Rescale Intercept (0028,1052)?
If CT numbers are off by a constant (water far from 0 HU), check that the reader applies the intercept and Pixel Representation correctly before suspecting the scanner. Do not assume −1024; read the value from each image.
Why is Rescale Intercept −1024 in CT?
So that CT numbers, which go below zero (air is about −1000 HU), can be stored as unsigned integers: a stored 0 represents −1024 HU and a stored 1024 represents water at 0 HU. It is a common choice, not a rule, so always read the value from the image.
Check RescaleIntercept in your files
The free DICOM Validator lists every header tag and flags problems. Files stay in your browser.
Open DICOM Validator →Remove patient data before sharing
The free DICOM Anonymizer applies a de-identification profile in your browser, with no upload.
Open DICOM Anonymizer →Sources
Checked against the DICOM standard, release 2026d. Module Types, query keys and de-identification actions come from these tables: