MajwareMAJWARE
MSA-1 = AAAccept / SuccessTable 0008

HL7 AA — Application Accept

The receiving application successfully received, understood, and processed the message. AA is the "all good" acknowledgment in original acknowledgment mode.

When you see AA (Acknowledgment Code)

Returned in MSA-1 of an ACK message after the receiving application has fully processed the original message without errors. This is the normal, healthy response you want to see for every message.

Common causes

  • Message was well-formed and all required segments/fields were present.
  • The trigger event and message type were supported by the receiver.
  • Business rules on the receiving side passed (patient found, order accepted, etc.).

How to fix it

  1. 1No action needed — AA means success. If you expected a downstream effect that did not occur, the issue is after acknowledgment (routing, filtering, or a separate channel), not the message itself.
  2. 2If you are debugging a flow and seeing AA but no data, check the receiving application's own logs rather than the interface — the message was accepted at the HL7 layer.

Example ACK message

A representative acknowledgment carrying MSA-1 = AA. Open it in the HL7 Viewer to inspect every field.

HL7 v2.x Message
1MSH||^~\&|RECEIVER|HOSP|SENDER|HOSP|20260310143300||ACK^A01^ACK|ACK00001|P|2.5.1
2MSA||AA|MSG00001|Message accepted and processed

Related codes

Frequently asked questions

What does AA mean in an HL7 ACK?

AA in MSA-1 means Application Accept — the receiving application successfully processed the message. It is the standard success acknowledgment in original acknowledgment mode.

What is the difference between AA and CA?

AA (Application Accept) confirms the application processed the message. CA (Commit Accept) is used in enhanced acknowledgment mode and only confirms the message was safely received and committed to storage, before application processing.

Debug your ACK in the viewer

Paste the ACK (or original message) and get instant segment parsing, MSA/ERR decoding, and validation. Free, client-side, no signup.

Open HL7 Message Viewer →

All HL7 error & ACK codes

Browse every acknowledgment code (Table 0008) and error condition code (Table 0357) with causes, fixes, and examples.

HL7 Error Code Reference →