MajwareMAJWARE
Patient

(0010,0010)

Patient's Name

Keyword: PatientName

The patient's full name as a Person Name: family name, given name, middle name, prefix and suffix, separated by carets.

Tag Attributes

Tag ID
(0010,0010)
Compact
00100010
Keyword
PatientName
VR
PN — Person Name
VM
1
Required
Type 2 — required, may be empty
PS3.15
Basic Profile action Z
Retired
No

Defined in

Patient Module

What Patient's Name contains

Patient's Name is a Person Name (PN) value. The caret (^) separates five components in a fixed order: family name, given name, middle name, prefix and suffix, so Dr. Jane Q. Doe Jr. is DOE^JANE^Q^DR^JR. Empty components at the end may be left out, which makes DOE^JANE and DOE^JANE^^^ the same name.

Names in other scripts use up to three component groups separated by an equals sign: alphabetic, ideographic and phonetic. PS3.5 gives the Japanese example Yamada^Tarou=山田^太郎=やまだ^たろう. Each group may hold up to 64 characters, and any text outside basic ASCII needs Specific Character Set (0008,0005) to say how the bytes are encoded.

In queries, PN is the one VR for which the standard allows matching to ignore case, accents or other variants, so the same search can return different results on two archives. Wildcards (* and ?) are allowed in name queries.

Patient ID (0010,0020) identifies the patient; the name is what people read and search for. Up to three component groups (alphabetic, ideographic and phonetic) can be given, separated by equals signs; the caret separates the components inside each group.

Group 0010 holds information about the patient.

Value format: PN (Person Name), VM 1

(0010,0010) PatientName has Value Representation PN (Person Name) and Value Multiplicity 1, which means exactly one value.

PN — Person Name

A name in five components separated by carets: family name, given name, middle name, prefix and suffix, for example DOE^JANE. Up to three component groups (alphabetic, ideographic and phonetic) can follow each other, separated by an equals sign.

Length
64 characters maximum per component group
Characters
The default character repertoire, or the one set by Specific Character Set (0008,0005). The backslash is not allowed.

Example value

DOE^JANE

Format mistakes to avoid

  • Doe, Jane is stored as a single family-name component. Write DOE^JANE so systems can find the given name.
  • Trailing empty components may be left out, so DOE^JANE and DOE^JANE^^^ are the same name and should match.

Where PatientName appears

Defined inTypeMeaning
Patient ModulePS3.3 C.7.1.12Required, but it may be empty (zero length) when the value is unknown.

A module lists the attributes an object must or may carry. Many IODs (CT Image, MR Image, Secondary Capture and others) include the same module, and an IOD-specific module can make an attribute stricter than the general one.

In a C-FIND query using the Study Root Query/Retrieve Information Model, it is a STUDY-level key of type R: a Required Key: every Query/Retrieve SCP must support matching on it.

In the Patient Root model it is a PATIENT-level key of type R: a Required Key: every Query/Retrieve SCP must support matching on it.

In a Modality Worklist query it is a matching key of type R (the worklist SCP must support matching on it) and a return key of type 1 (the SCP must return it with a value).

De-identification (PS3.15)

PS3.15 Table E.1-1 gives Patient's Name the Basic Profile action Z: replace it with an empty value, or with a dummy value consistent with the VR.

To see how de-identification changes your own files, try the free DICOM Anonymizer, which runs in the browser and uploads nothing.

In archives and migrations

Patient attributes are the values most often changed after acquisition: corrections from the RIS or a master patient index, merges, and attribute coercion on receipt, which an archive lists in its DICOM conformance statement. Before a migration, decide which archive holds the correct demographics, because the same study with different patient values in two places looks like two patients.

Common errors and how to fix them

  • Names written as "Doe, Jane"

    The whole string becomes the family name, so the given name cannot be searched. Convert to DOE^JANE in the interface that writes the name, usually the RIS feed to the worklist.

  • Names garbled after a transfer

    Non-ASCII characters were written without the right Specific Character Set (0008,0005), or a receiver ignored it. Look at the raw bytes and the declared character set together, and fix the sender.

  • Prior studies not found for the same patient

    The spelling or the split into components differs between systems (DOE^JANE against DOE^JANE^M). Match patients on Patient ID and its issuer, and use the name only to confirm.

Troubleshooting: Name mismatches between RIS and PACS cause failed prior-study matching and patient reconciliation work. Agree on case and on how names are split into components, and set Specific Character Set (0008,0005) whenever names use non-ASCII characters.

Check a file in seconds with the free DICOM Validator: it reads the header in your browser, lists the tags with their values, and flags missing or malformed key attributes.

Patient's Name: frequently asked questions

What is DICOM tag (0010,0010) Patient's Name?

The patient's full name as a Person Name: family name, given name, middle name, prefix and suffix, separated by carets. Patient's Name is a Person Name (PN) value. The caret (^) separates five components in a fixed order: family name, given name, middle name, prefix and suffix, so Dr. Jane Q. Doe Jr. is DOE^JANE^Q^DR^JR. Empty components at the end may be left out, which makes DOE^JANE and DOE^JANE^^^ the same name.

What VR and VM does Patient's Name (0010,0010) have?

(0010,0010) PatientName has Value Representation PN (Person Name) and Value Multiplicity 1, which means exactly one value. A name in five components separated by carets: family name, given name, middle name, prefix and suffix, for example DOE^JANE. Up to three component groups (alphabetic, ideographic and phonetic) can follow each other, separated by an equals sign. Maximum length: 64 characters maximum per component group.

Is Patient's Name (0010,0010) required?

In the Patient Module (PS3.3 C.7.1.1) it is Type 2: required, but it may be empty (zero length) when the value is unknown.

Can you query a PACS by Patient's Name?

In a C-FIND query using the Study Root Query/Retrieve Information Model, it is a STUDY-level key of type R: a Required Key: every Query/Retrieve SCP must support matching on it. In the Patient Root model it is a PATIENT-level key of type R: a Required Key: every Query/Retrieve SCP must support matching on it. In a Modality Worklist query it is a matching key of type R (the worklist SCP must support matching on it) and a return key of type 1 (the SCP must return it with a value).

How is Patient's Name handled when de-identifying DICOM files?

PS3.15 Table E.1-1 gives Patient's Name the Basic Profile action Z: replace it with an empty value, or with a dummy value consistent with the VR.

How do I troubleshoot Patient's Name (0010,0010)?

Name mismatches between RIS and PACS cause failed prior-study matching and patient reconciliation work. Agree on case and on how names are split into components, and set Specific Character Set (0008,0005) whenever names use non-ASCII characters.

What does the caret (^) mean in a DICOM patient name?

The caret separates the components of a Person Name: family name, given name, middle name, prefix and suffix, in that order. DOE^JANE means family name Doe, given name Jane.

Check PatientName in your files

The free DICOM Validator lists every header tag and flags problems. Files stay in your browser.

Open DICOM Validator →

Remove patient data before sharing

The free DICOM Anonymizer applies a de-identification profile in your browser, with no upload.

Open DICOM Anonymizer →

Sources

More Patient tags